A plasterboard bulkhead hung below the structure on rods and cross rails, with board on the soffit and on the face of the drop. Run length, depth, drop and upper ceiling width, Board thickness, size and layers, Frame, channel and hanger spacing
Category: Ceilings › Board Ceilings
By Huu Khanh Nguyen · Updated November 14, 2026
| Name | Default | Unit |
|---|---|---|
| Length | 3600 | mm |
| Depth | 800 | mm |
| Height | 900 | mm |
| Upper Ceiling Width | 400 | mm |
| Drop | 450 | mm |
| Board Layers | 1 | |
| Board Thickness | 13 | mm |
| Board Width | 1200 | mm |
| Board Length | 2400 | mm |
| Board Finish | ceilingPlasterboard | |
| Frame Spacing | 600 | mm |
| Frame Edge | 200 | mm |
| Channel Spacing | 600 | mm |
| Channel Depth | 27.3 | mm |
| Rail Depth | 26.35 | mm |
| Rail Thickness | 0.75 | mm |
| Hanger Spacing | 1200 | mm |
| End Clearance | 10 | mm |
| Stock Length | 3600 | mm |
| Framing Finish | ceilingGalvanisedSteel | |
| stack | boardLayers * boardThickness | mm |
| pieceCount | Math.ceil(sizeX / boardLength) | |
| soffitStrips | Math.ceil((faceY - stack) / boardWidth) | |
| faceStrips | Math.ceil(drop / boardWidth) | |
| frameCount | Math.max(1, Math.ceil((sizeX - 2 * frameEdge) / frameSpacing)) | |
| framePitch | (sizeX - 2 * frameEdge) / frameCount | mm |
| furringSpan | faceY - stack - (furringWidth + crossWidth) - furringDepth - primaryThickness - 2 * endClearance | mm |
| furringLines | Math.ceil(furringSpan / furringSpacing) + 1 | |
| furringPieces | Math.ceil((sizeX - 2 * endClearance) / stockLength) | |
| rodStep | Math.floor(hangerSpacing / framePitch) | |
| faceY | sizeY - upperWidth | mm |
| yDropper | faceY - stack - furringDepth - primaryThickness - crossWidth | mm |
| railBase | drop + stack + furringDepth + primaryThickness | mm |
| lowerRailTop | stack + furringDepth + primaryThickness + primaryDepth | mm |
| upperStrips | Math.ceil((upperWidth + stack) / boardWidth) | |
| upperSpan | upperWidth + stack - furringWidth | mm |
| upperLines | Math.ceil(upperSpan / furringSpacing) + 1 | |
| faceSpan | drop - stack - furringWidth | mm |
| faceLines | faceSpan >= furringWidth ? Math.ceil(faceSpan / furringSpacing) + 1 : 1 | |
| angleLeg | 53 | mm |
| clipWidth | 35 | mm |
| clipHeight | 115 | mm |
| Furring profile width | furringChannel.options.profile.find((row) => row.value == furringChannelUrl).width | mm |
| Rail width | topCrossRail.options.profile.find((row) => row.value == topCrossRailUrl).width | mm |