Overhead Closer With Link Arm

Overhead Closer With Link Arm

A surface-mounted door closer with a two-piece folding arm joining it to a bracket on the frame.

Details

Category: Profile Doors › Single Doors › Door Closers

By Huu Khanh Nguyen · Updated November 16, 2026

Parameters

NameDefaultUnit
FinishcloserSilver
Open Angle0°
Hinge Axis Distance300mm
Hinge Axis Offset24mm
Main Arm Length265mm
Forearm Length267.1mm
PoseMath.min(openAngle, ((Math.atan2(((23 + hingeOffset) * 48.5), ((hingeDistance - 48.5) * hingeDistance + (23 + hingeOffset) ** 2)) + Math.acos(Math.max(-1, Math.min(1, (((hingeDistance ** 2 + 2 * (23 + hingeOffset) ** 2 + (hingeDistance - 48.5) ** 2) - (mainArmLength + forearmLength) ** 2) / 2) / Math.hypot(((hingeDistance - 48.5) * hingeDistance + (23 + hingeOffset) ** 2), ((23 + hingeOffset) * 48.5)))))) * 180 / Math.PI))°
pinX-hingeDistance + (hingeDistance - 48.5) * Math.cos(pose * Math.PI / 180) + (23 + hingeOffset) * Math.sin(pose * Math.PI / 180)mm
pinY-hingeOffset - (hingeDistance - 48.5) * Math.sin(pose * Math.PI / 180) + (23 + hingeOffset) * Math.cos(pose * Math.PI / 180)mm
pinDistanceMath.hypot(pinX, pinY - 23)mm
elbowAlong(mainArmLength ** 2 - forearmLength ** 2 + pinDistance ** 2) / (2 * pinDistance)mm
elbowOffsetMath.sqrt(Math.max(0, mainArmLength ** 2 - elbowAlong ** 2))mm
elbowX(elbowAlong * pinX + elbowOffset * (pinY - 23)) / pinDistancemm
elbowY23 + (elbowAlong * (pinY - 23) - elbowOffset * pinX) / pinDistancemm
Leaf Thickness44.45mm