Straight Carcass Rails

Straight Carcass Rails

A rectangular cabinet box with four optional top members (front rail, rear rail, left brace, right brace), each a box of adjustable width and height flush with the top (with the front rail off, a brace front end rests on the host's face frame), a bottom, a back that can be left open, shelves and a choice of toe notch, separate base, legs and plinth, furniture legs or no base.

Details

Category: Framed Kitchen Cabinets › Framed Base Cabinets › Carcasses

By Huu Khanh Nguyen · Updated November 14, 2026

Parameters

NameDefaultUnit
Width762mm
Height876.3mm
Depth609.6mm
Bottomtrue
Backtrue
Shelves1
Fixed Boards0
Front Railtrue
Rear Railtrue
Left Bracefalse
Right Bracefalse
Basenotch
Toe Height114.3mm
Toe Depth76.2mm
Toe Board Thickness12.7mm
Leg Height150mm
Leg Diameter35mm
Leg Inset50mm
Plate Diameter48mm
Plate Thickness3mm
Bottom Height(base == 'legs' || base == 'feet' ? legHeight : base == 'none' ? 0 : toeHeight)mm
Shelf Zone BottombottomHeight + panelThicknessmm
Shelf Zone Top(sizeZ - panelThickness)mm
Panel Thickness16mm
Back Thickness2.8mm
Front Rail WidthMath.min(80, ((back ? sizeY - backInset - backThickness : sizeY) - panelThickness) / 2)mm
Front Rail HeightpanelThicknessmm
Rear Rail WidthMath.min(80, ((back ? sizeY - backInset - backThickness : sizeY) - panelThickness) / 2)mm
Rear Rail HeightpanelThicknessmm
Left Brace WidthMath.min(76.2, (sizeX - 2 * panelThickness) / 2)mm
Left Brace Height12.7mm
Right Brace WidthMath.min(76.2, (sizeX - 2 * panelThickness) / 2)mm
Right Brace Height12.7mm
Back Inset35.8mm
Shelf Thickness16mm
Shelf Setback46.8mm