Clip-In Metal Panel Ceiling

Clip-In Metal Panel Ceiling

A suspended ceiling of metal pans that clip into spring tees. The tees run along the room width on every pan joint, C channels cross them and carry the hanger rods, and the room edge is closed with wall angle. Room size and plenum depth, Largest pan length and width, Channel and hanger spacing, Finish, Panel finish

Details

Category: Ceilings › Metal Ceilings

By Huu Khanh Nguyen · Updated November 14, 2026

Parameters

NameDefaultUnit
Room Width4800mm
Room Depth3000mm
Maximum Panel Length1200mm
Maximum Panel Width600mm
Panel Joint3mm
Panel Return Heightpan.options.pan.find((row) => row.value == panUrl).heightmm
Primary Setback From WallMath.min(300, (sizeX - 2 * thickness) / 4, (sizeY - 2 * thickness) / 4)mm
Maximum Hanger Spacing1200mm
Wall Angle Length3000mm
Wall Angle Leg24mm
Wall Angle Sheet Thickness0.38mm
Plenum Depth600mm
Maximum Channel Spacing1200mm
Spring Tee Length4000mm
Spring Tee Heightcarrier.options.carrier.find((row) => row.value == carrierUrl).heightmm
Channel Length3000mm
Channel Width38mm
Channel Height12mm
Channel Thickness0.5mm
FinishceilingPaintedMetalWhite
Panel FinishceilingMeshExpandedGrey
Perimeter Trim FinishceilingPaintedMetalWhite
Hanger FinishceilingGalvanisedSteel
Carrier FinishceilingGalvanisedSteel
Piece LengthMath.min(teeLength, carrier.options.carrier.find((row) => row.value == carrierUrl).stock)mm
Plan leg of the chosen wall anglewallAngle.options.angle.find((row) => row.value == wallAngleUrl).takesLegs ? trimLeg : wallAngle.options.angle.find((row) => row.value == wallAngleUrl).legYmm