The cabinet box of an L-shaped corner unit with two legs, with sides, bottom, a front and a rear rail and optional left and right braces at the top, back, shelves and a choice of toe notch, separate base, legs and plinth, feet or no base.
Category: Framed Kitchen Cabinets › Framed Base Cabinets › Carcasses
By Huu Khanh Nguyen · Updated November 14, 2026
| Name | Default | Unit |
|---|---|---|
| Width | 838.2 | mm |
| Depth | 838.2 | mm |
| Back Leg Depth | 609.6 | mm |
| Side Leg Depth | 609.6 | mm |
| Height | 876.3 | mm |
| Bottom | true | |
| Back | true | |
| Shelves | 1 | |
| Free Height Below Shelves | 0 | mm |
| Free Height Above Shelves | 0 | mm |
| Front Rail | true | |
| Rear Rail | true | |
| Left Brace | false | |
| Right Brace | false | |
| Base | notch | |
| Toe Height | 114.3 | mm |
| Toe Depth | 76.2 | mm |
| Toe Board Thickness | 12.7 | mm |
| Leg Height | 150 | mm |
| Leg Diameter | 35 | mm |
| Leg Inset | 50 | mm |
| Plate Diameter | 48 | mm |
| Plate Thickness | 3 | mm |
| Bottom Height | (base == 'legs' || base == 'feet' ? legHeight : base == 'none' ? 0 : toeHeight) | mm |
| Panel Thickness | 16 | mm |
| Back Thickness | 2.8 | mm |
| Back Inset | 35.8 | mm |
| Shelf Thickness | 16 | mm |
| Shelf Setback | 46.8 | mm |
| Front Rail Width | Math.min(80, ((Math.min(backLegDepth, sideLegDepth) - backInset - backThickness) - panelThickness) / 2) | mm |
| Front Rail Height | panelThickness | mm |
| Rear Rail Width | Math.min(80, ((Math.min(backLegDepth, sideLegDepth) - backInset - backThickness) - panelThickness) / 2) | mm |
| Rear Rail Height | panelThickness | mm |
| Left Brace Width | Math.min(76.2, Math.min(sizeX - sideLegDepth, sizeY - backLegDepth) - panelThickness) | mm |
| Left Brace Height | 12.7 | mm |
| Right Brace Width | Math.min(76.2, Math.min(sizeX - sideLegDepth, sizeY - backLegDepth) - panelThickness) | mm |
| Right Brace Height | 12.7 | mm |
| Back Clip | 0 | mm |