Obtuse Corner Carcass

Obtuse Corner Carcass

The cabinet box of a corner unit whose two walls meet at an obtuse angle, inside or outside, with sides, bottom, top, back, shelves and a choice of toe notch, separate base, legs and plinth, feet or no base.

Details

Category: Framed Kitchen Cabinets › Framed Base Cabinets › Carcasses

By Huu Khanh Nguyen · Updated November 14, 2026

Parameters

NameDefaultUnit
WidthMath.max(0, -sideLegLength * Math.cos(wallAngle * Math.PI / 180), -sideLegLength * Math.cos(wallAngle * Math.PI / 180) - legDepth * Math.sin(wallAngle * Math.PI / 180), -legDepth * (1 / Math.tan(wallAngle * Math.PI / 360))) - Math.min(-backLegLength, 0, -sideLegLength * Math.cos(wallAngle * Math.PI / 180), -sideLegLength * Math.cos(wallAngle * Math.PI / 180) - legDepth * Math.sin(wallAngle * Math.PI / 180), -legDepth * (1 / Math.tan(wallAngle * Math.PI / 360)))mm
DepthMath.max(0, -sideLegLength * Math.sin(wallAngle * Math.PI / 180), -sideLegLength * Math.sin(wallAngle * Math.PI / 180) + legDepth * Math.cos(wallAngle * Math.PI / 180), -legDepth) - Math.min(0, -sideLegLength * Math.sin(wallAngle * Math.PI / 180), -sideLegLength * Math.sin(wallAngle * Math.PI / 180) + legDepth * Math.cos(wallAngle * Math.PI / 180), -legDepth)mm
Wall Angle135°
Back Leg Length533.4mm
Side Leg Length533.4mm
Leg Depth304.8mm
Height876.3mm
Bottomtrue
Backtrue
Shelves1
Hanging Railfalse
Basenotch
Toe Height114.3mm
Toe Depth76.2mm
Toe Board Thickness12.7mm
Leg Height150mm
Leg Diameter35mm
Leg Inset50mm
Bottom Height(base == 'legs' || base == 'feet' ? legHeight : base == 'none' ? 0 : toeHeight)mm
Panel Thickness16mm
Back Thickness2.8mm
Back Inset35.8mm
Shelf Thickness16mm
Shelf Setback46.8mm
Hanging Rail Thickness15.875mm
Hanging Rail Height101.6mm