A sectional folding metal loft ladder with hollow side rails and formed treads that unfolds through a framed ceiling hatch with an insulated lid. Ceiling opening width and length, Room height, Handrail on or off, Stowed or unfolded
Category: Stairs › Loft Access Ladders
By Huu Khanh Nguyen · Updated November 14, 2026
| Name | Default | Unit |
|---|---|---|
| Ceiling opening width | 600 | mm |
| Ceiling opening length | 1200 | mm |
| Room height | 2800 | mm |
| Unfolded | 1 | |
| Handrail | false | |
| Hatch width | openingWidth - 60 | mm |
| Hatch length | openingLength - 56 | mm |
| Hatch thickness | 36 | mm |
| Ladder run | 0.42 * roomHeight | mm |
| Ladder length | Math.sqrt((roomHeight + hatchThickness) ** 2 + ladderRun ** 2) | mm |
| Deploy angle | Math.atan2(roomHeight + hatchThickness, ladderRun) * unfold | |
| Section count | Math.ceil(ladderLength / (innerLength - 20)) | |
| Section length | ladderLength / sectionCount | mm |
| Treads per section | Math.round((sectionLength - 2 * 125) / 250) + 1 | |
| Tread pitch | (sectionLength - 2 * 125) / (treadsPerSection - 1) | mm |
| Ladder width | 340 | mm |
| Fold angle | 180 * (1 - unfold) | ° |
| Stay arm box pin y | -innerLength / 2 + 0.35 * innerLength | mm |
| Stay arm box pin z | 100 | mm |
| Stay arm hatch pin y | -innerLength / 2 + (0.6 * innerLength) * Math.cos(deployAngle) + (5 - 40 * unfold) * Math.sin(deployAngle) | mm |
| Stay arm hatch pin z | hatchThickness - (0.6 * innerLength) * Math.sin(deployAngle) + (5 - 40 * unfold) * Math.cos(deployAngle) | mm |
| Stay arm span | Math.hypot(hatchEndY - strutBoxY, hatchEndZ - strutBoxZ) | mm |
| Stay arm upper link | (1.03 * Math.hypot(0.6 * innerLength * Math.cos(Math.atan2(roomHeight + hatchThickness, ladderRun)) - 35 * Math.sin(Math.atan2(roomHeight + hatchThickness, ladderRun)) - 0.35 * innerLength, hatchThickness - 0.6 * innerLength * Math.sin(Math.atan2(roomHeight + hatchThickness, ladderRun)) - 35 * Math.cos(Math.atan2(roomHeight + hatchThickness, ladderRun)) - 100) + 0.9 * Math.hypot(0.25 * innerLength, hatchThickness + 5 - 100)) / 2 | mm |
| Stay arm lower link | (1.03 * Math.hypot(0.6 * innerLength * Math.cos(Math.atan2(roomHeight + hatchThickness, ladderRun)) - 35 * Math.sin(Math.atan2(roomHeight + hatchThickness, ladderRun)) - 0.35 * innerLength, hatchThickness - 0.6 * innerLength * Math.sin(Math.atan2(roomHeight + hatchThickness, ladderRun)) - 35 * Math.cos(Math.atan2(roomHeight + hatchThickness, ladderRun)) - 100) - 0.9 * Math.hypot(0.25 * innerLength, hatchThickness + 5 - 100)) / 2 | mm |
| Stay arm knee y | strutBoxY + ((armSpan * armSpan + armUpperLength * armUpperLength - armLowerLength * armLowerLength) / (2 * armSpan)) * (hatchEndY - strutBoxY) / armSpan - 1 * Math.sqrt(Math.max(0, armUpperLength * armUpperLength - Math.pow((armSpan * armSpan + armUpperLength * armUpperLength - armLowerLength * armLowerLength) / (2 * armSpan), 2))) * (hatchEndZ - strutBoxZ) / armSpan | mm |
| Stay arm knee z | strutBoxZ + ((armSpan * armSpan + armUpperLength * armUpperLength - armLowerLength * armLowerLength) / (2 * armSpan)) * (hatchEndZ - strutBoxZ) / armSpan + 1 * Math.sqrt(Math.max(0, armUpperLength * armUpperLength - Math.pow((armSpan * armSpan + armUpperLength * armUpperLength - armLowerLength * armLowerLength) / (2 * armSpan), 2))) * (hatchEndY - strutBoxY) / armSpan | mm |