The cabinet box of a corner base unit whose front is a V-shaped notch between two side walls, with optional angled front panels, bottom, back, shelves, a front and a rear top rail, optional left and right top braces (each member sized by a width and a height) and an optional base.
Category: Framed Kitchen Cabinets › Framed Base Cabinets › Carcasses
By Huu Khanh Nguyen · Updated November 14, 2026
| Name | Default | Unit |
|---|---|---|
| Width | 444.5 | mm |
| Depth | 801.6875 | mm |
| Height | 876.3 | mm |
| Notch Angle | 90 | ° |
| Bottom | true | |
| Back | true | |
| Front Panels | true | |
| Front Panel Thickness | 16 | mm |
| Shelves | 1 | |
| Free Height Below Shelves | 0 | mm |
| Free Height Above Shelves | 0 | mm |
| Base | notch | |
| Toe Height | 114.3 | mm |
| Toe Depth | 76.2 | mm |
| Toe Board Thickness | 12.7 | mm |
| Leg Height | 150 | mm |
| Leg Diameter | 35 | mm |
| Leg Inset | 50 | mm |
| Bottom Height | (base == 'legs' || base == 'feet' ? legHeight : base == 'none' ? 0 : toeHeight) | mm |
| Panel Thickness | 16 | mm |
| Back Thickness | 2.8 | mm |
| Back Inset | 35.8 | mm |
| Shelf Thickness | 16 | mm |
| Shelf Setback | 46.8 | mm |
| Front Rail | true | |
| Front Rail Width | Math.min(80, Math.sin((notchAngle * Math.PI / 360)) * ((sizeY - backInset - backThickness) - panelThickness - (sizeX / 2) / Math.tan((notchAngle * Math.PI / 360))) / 2 - (armPanels ? armThickness : 0)) | mm |
| Front Rail Height | panelThickness | mm |
| Rear Rail | true | |
| Rear Rail Width | Math.min(80, ((sizeY - backInset - backThickness) - panelThickness - (sizeX / 2) / Math.tan((notchAngle * Math.PI / 360))) / 2) | mm |
| Rear Rail Height | panelThickness | mm |
| Left Brace | false | |
| Left Brace Width | Math.min(76.2, sizeX / 2 - panelThickness) | mm |
| Left Brace Height | 12.7 | mm |
| Right Brace | false | |
| Right Brace Width | Math.min(76.2, sizeX / 2 - panelThickness) | mm |
| Right Brace Height | 12.7 | mm |
| Fixed Boards | 0 | |
| Fixed Board Height | 0 | mm |
| Fixed Board Gap | 0 | mm |
| Shelf Floor | Math.max(bottomHeight + panelThickness + shelfZoneBottom, fixedBoardCount > 0 ? bottomHeight + 2 * panelThickness + fixedBoardHeight + (fixedBoardCount - 1) * (fixedBoardGap + panelThickness) : 0) | mm |