A straight run of ornamental picket panels between steel posts, level or following a slope, in steel or aluminium. Post section, Run length, height and bay width, Equal bays, set spacing or set opening, Slope of the ground, Steel or aluminium bar and rail section, Finish
Category: Fences › Metal Ornamental Fences
By Huu Khanh Nguyen · Updated November 14, 2026
| Name | Default | Unit |
|---|---|---|
| Run Length | 5575.3 | mm |
| Cap overhang | 2.5 | mm |
| Cap height | 13 | mm |
| Run between post faces | sizeX - 2 * capOverhang | mm |
| Overall Height | height + embedDepth + (runX - postWidth) * Math.tan(rakeAngle * Math.PI / 180) + capHeight | mm |
| Fence Height | 1219.2 | mm |
| Slope | 0 | ° |
| Material | steel | |
| Bar Section | material == 'aluminium' ? 1 : 0 | |
| panelMin | [111, 120, 96, 96][section] | mm |
| Bay Width | 1841.5 | mm |
| Distribution | count | |
| Ground Clearance | 50 | mm |
| Post Embedment | 533.4 | mm |
| Post Width | 50.8 | mm |
| Post Depth | 50.8 | mm |
| Finish | ral9005 | |
| nominalPitch | distribution == 'gap' ? bayWidth + postWidth : bayWidth | mm |
| cutLast | distribution != 'count' && (runX - postWidth) - (Math.max(1, Math.ceil((runX - postWidth) / nominalPitch - 1e-9)) - 1) * nominalPitch >= (panelMin + postWidth) - 1e-9 | |
| bayCount | cutLast ? Math.max(1, Math.ceil((runX - postWidth) / nominalPitch - 1e-9)) : Math.max(Math.ceil((runX - postWidth) / (3000 + postWidth) - 1e-9), Math.min(Math.round((runX - postWidth) / nominalPitch), Math.floor((runX - postWidth) / (panelMin + postWidth) + 1e-9))) | |
| pitch | cutLast ? nominalPitch : (runX - postWidth) / bayCount | mm |