Niche Carcass Rails

Niche Carcass Rails

The cabinet box with a fixed-board niche for an appliance, an optional raised floor and a choice of toe notch, separate base, legs and plinth, feet or no base, with rails across the top.

Details

Category: Framed Kitchen Cabinets › Framed Base Cabinets › Carcasses

By Huu Khanh Nguyen · Updated November 14, 2026

Parameters

NameDefaultUnit
Width762mm
Height2133.6mm
Depth609.6mm
Bottomtrue
Backtrue
Shelves0
Front Railtrue
Rear Railtrue
Left Bracefalse
Right Bracefalse
Basenotch
Toe Height114.3mm
Toe Depth76.2mm
Toe Board Thickness12.7mm
Leg Height150mm
Leg Diameter35mm
Leg Inset50mm
Bottom Height(base == 'legs' || base == 'feet' ? legHeight : base == 'none' ? 0 : toeHeight)mm
Back Rise0mm
Niche BottombottomHeight + (bottom ? panelThickness : 0)mm
Niche Height590mm
Shelf Zone BottomMath.min((nicheBottom + nicheHeight) + panelThickness, (sizeZ - topClearance))mm
Shelf Zone Top(sizeZ - topClearance)mm
Panel Thickness16mm
Back Thickness2.8mm
Back Inset35.8mm
Shelf Thickness16mm
Shelf Setback46.8mm
Front Rail WidthMath.min(80, ((back ? sizeY - backInset - backThickness : sizeY) - panelThickness) / 2)mm
Front Rail HeightpanelThicknessmm
Rear Rail WidthMath.min(80, ((back ? sizeY - backInset - backThickness : sizeY) - panelThickness) / 2)mm
Rear Rail HeightpanelThicknessmm
Left Brace WidthMath.min(76.2, (sizeX - 2 * panelThickness - shelfThickness) / 2)mm
Left Brace Height12.7mm
Right Brace WidthMath.min(76.2, (sizeX - 2 * panelThickness - shelfThickness) / 2)mm
Right Brace Height12.7mm
Top ClearanceMath.max(panelThickness, frontRail ? frontRailHeight : 0, rearRail ? rearRailHeight : 0, leftBrace ? leftBraceHeight : 0, rightBrace ? rightBraceHeight : 0)mm