Open Arm Awning

Open Arm Awning

A wall-mounted folding arm awning with an exposed roller and no cassette, on cast wall brackets. Wall, ceiling, roof rafter or cross arm mounting, Projection, tilt and width, Optional hood over the rolled fabric, Optional valance, Finish

Details

Category: Outdoor Shelter › Awnings

By Huu Khanh Nguyen · Updated November 13, 2026

Parameters

NameDefaultUnit
Width4000mm
Depth(reelY + tubeDiameter / 2) + flatDepth + profileDepthmm
HeightbracketHeight + (hood ? hoodHeight + 44.1 : 0) + Math.max(0, (100 * Math.cos(tilt * Math.PI / 180) + ((headDepth - (reelY + tubeDiameter / 2) + 1) * Math.sin((90 - foldAngle) * Math.PI / 180) + 25 * Math.cos((90 - foldAngle) * Math.PI / 180)) * Math.sin(tilt * Math.PI / 180)) - (reelZ - tubeDiameter / 2), lowering + (valance ? valanceHeight : 0) - (reelZ - tubeDiameter / 2))mm
Projection2600mm
Tilt15°
Extension1
Bracket Distance From End200mm
Arm Width35mm
Arm Height60mm
Front Profile Depth70mm
Hoodfalse
Hood Height33.8mm
Valancefalse
Valance Height210mm
FinishpowderRal9016
FabricfabricLightGrey
BracketssizeX <= 3500 ? 2 : sizeX <= 4700 ? 3 : sizeX <= 5900 ? 4 : 5
Roller DiametersizeX > 4100 ? 78 : 70mm
Flat depth(armLength * extension + armHeight * Math.tan(tilt * Math.PI / 180)) * Math.cos(tilt * Math.PI / 180)
Lowering(armLength * extension + armHeight * Math.tan(tilt * Math.PI / 180)) * Math.sin(tilt * Math.PI / 180)
Bracket depthawningBracket.options.bracket.find((row) => row.value == mount).depthmm
Bracket heightawningBracket.options.bracket.find((row) => row.value == mount).heightmm
Arm head installed depthawningBracket.options.bracket.find((row) => row.value == mount).headDepthmm
Reel tube against the bracketawningBracket.options.bracket.find((row) => row.value == mount).reelClamp
Reel centre distanceawningBracket.options.bracket.find((row) => row.value == mount).reelY + (reelClamp ? tubeDiameter / 2 : 0)mm
Reel centre heightawningBracket.options.bracket.find((row) => row.value == mount).reelZ - (reelClamp ? tubeDiameter / 2 : 0)mm
armLengthprojection - armHeight * Math.tan(tilt * Math.PI / 180)mm
armBowarmLength > 600 ? 0.064 * armLength : 0mm
upperFullMath.sqrt(armLength * armLength / 4 + armBow * armBow)mm
foldAngleMath.acos(extension * armLength / (2 * upperFull)) * 180 / Math.PI