Chest on Chest

Chest on Chest

A tall chest of drawers made of two cases, a narrower upper chest standing on a wider lower chest. Drawers in the upper and lower chest, Front style, pull and finishes, Plinth or legs

Details

Category: Chests of Drawers › Chests of Drawers

By Huu Khanh Nguyen · Updated November 13, 2026

Parameters

NameDefaultUnit
Width1029mm
Height1530mm
Depth502mm
Lower drawers4
Upper drawers4
Bottom to top drawer height1
Upper chest height600mm
Upper chest inset each side25.5mm
Upper chest set back at the front25mm
Basebracket
Base height100mm
Carcass liftbaseKind == 'floor' ? 0 : baseHeightmm
Pull FinishhandleBrushedSteel
Front Finishwhite
Body Finishcarcass193
Board thickness19mm
Front thickness19mm
Edge gap1.5mm
Gap between fronts3mm
Lowest lower chest20 + 2 * reveal + (lowerRows - 1) * gap + (lowerRows > 1 ? lowerRows * (1 + rowHeightRatio) / 2 : 1) * frontMinimummm
Lowest upper chestcorniceDepth + 20 + 2 * reveal + (upperRows - 1) * gap + (upperRows > 1 ? upperRows * (1 + rowHeightRatio) / 2 : 1) * frontMinimummm
Lower chest heightsizeZ - lift - upperHeightmm
Upper chest widthsizeX - 2 * upperInsetmm
Upper chest depthdepth - upperSetbackmm
Bracket width70mm
Skirt scallop height55mm
Pulls per drawer2
Cornicetrue
Cornice height60mm
Cornice depth in the upper casecornice ? corniceHeight : 0mm
Cornice overhang per stepMath.min(upperInset, upperSetback) / 3mm
Smallest drawer frontMath.max(45.72, 8 + 6.35 + 15.875 / 2 + 2 * Math.max(12.7, panelThickness - reveal))mm