Angle Corner Carcass Rails

Angle Corner Carcass Rails

The cabinet box of a corner unit with a diagonal front, with sides, bottom, back, shelves, optional fixed boards, up to four top members (front rail, rear rail, left brace, right brace, each with its own section; with the front rail off, a brace front end rests on the host's face frame) and a choice of toe notch, separate base, legs and plinth, feet or no base.

Details

Category: Framed Kitchen Cabinets › Framed Base Cabinets › Carcasses

By Huu Khanh Nguyen · Updated November 14, 2026

Parameters

NameDefaultUnit
WidthfrontWidth / Math.SQRT2 + sideLegDepthmm
DepthfrontWidth / Math.SQRT2 + backLegDepthmm
Front Width609.6mm
Back Leg Depth609.6mm
Side Leg Depth609.6mm
Height876.3mm
Bottomtrue
Backtrue
Shelves1
Free Height Below Shelves0mm
Free Height Above Shelves0mm
Basenotch
Toe Height114.3mm
Toe Depth76.2mm
Toe Board Thickness12.7mm
Leg Height150mm
Leg Diameter35mm
Leg Inset50mm
Plate Diameter48mm
Plate Thickness3mm
Bottom Height(base == 'legs' || base == 'feet' ? legHeight : base == 'none' ? 0 : toeHeight)mm
Panel Thickness16mm
Back Thickness2.8mm
Back Inset35.8mm
Shelf Thickness16mm
Shelf Setback46.8mm
Front Railtrue
Front Rail WidthMath.min(80, ((sizeX - backInset - backThickness) + (sizeY - backInset - backThickness) - (frontWidth / Math.SQRT2)) / (2 * Math.SQRT2))mm
Front Rail HeightpanelThicknessmm
Rear Railtrue
Rear Rail WidthMath.min(80, ((sizeX - backInset - backThickness) + (sizeY - backInset - backThickness) - (frontWidth / Math.SQRT2)) / 4, (Math.min((sizeX - backInset - backThickness), (sizeY - backInset - backThickness)) - panelThickness) / 2)mm
Rear Rail HeightpanelThicknessmm
Left Bracefalse
Left Brace WidthMath.min(76.2, ((sizeX - backInset - backThickness) - panelThickness) / 2, ((frontWidth / Math.SQRT2) - 2 * panelThickness) / 2)mm
Left Brace Height12.7mm
Right Bracefalse
Right Brace WidthMath.min(76.2, ((sizeY - backInset - backThickness) - panelThickness) / 2, ((frontWidth / Math.SQRT2) - 2 * panelThickness) / 2)mm
Right Brace Height12.7mm
Fixed Boards0
Fixed Board Height0mm
Fixed Board Gap0mm
Shelf FloorMath.max(bottomHeight + panelThickness + shelfZoneBottom, fixedBoardCount > 0 ? bottomHeight + 2 * panelThickness + fixedBoardHeight + (fixedBoardCount - 1) * (fixedBoardGap + panelThickness) : 0)mm