Timber Folding Loft Ladder

Timber Folding Loft Ladder

A sectional folding timber loft ladder that unfolds through a framed ceiling hatch with an insulated lid. Ceiling opening width and length, Room height, Stowed or unfolded

Details

Category: Stairs › Loft Access Ladders

By Huu Khanh Nguyen · Updated November 14, 2026

Parameters

NameDefaultUnit
Ceiling opening width600mm
Ceiling opening length1200mm
Room height2800mm
Unfolded1
Hatch widthopeningWidth - 60mm
Hatch lengthopeningLength - 56mm
Hatch thickness36mm
Ladder run0.43 * roomHeightmm
Ladder lengthMath.sqrt((roomHeight + hatchThickness) ** 2 + ladderRun ** 2)mm
Deploy angleMath.atan2(roomHeight + hatchThickness, ladderRun) * unfold
Section countMath.ceil(ladderLength / (innerLength - 20))
Section lengthladderLength / sectionCountmm
Treads per sectionMath.round((sectionLength - 2 * 125) / 250) + 1
Tread pitch(sectionLength - 2 * 125) / (treadsPerSection - 1)mm
Ladder widthopeningWidth >= 600 ? 340 : 300mm
Fold angle180 * (1 - unfold)°
Strut box pin Y-innerLength / 2 + 0.35 * innerLengthmm
Strut box pin Z100mm
Strut hatch pin Y-innerLength / 2 + 0.6 * innerLength * Math.cos(deployAngle) + (4 - 40 * unfold) * Math.sin(deployAngle)mm
Strut hatch pin ZhatchThickness - 0.6 * innerLength * Math.sin(deployAngle) + (4 - 40 * unfold) * Math.cos(deployAngle)mm
Strut reach, closedMath.hypot(-innerLength / 2 + 0.6 * innerLength * Math.cos(0) + (4 - 40 * 0) * Math.sin(0) - strutBoxY, hatchThickness - 0.6 * innerLength * Math.sin(0) + (4 - 40 * 0) * Math.cos(0) - strutBoxZ)mm
Strut reach, openMath.hypot(-innerLength / 2 + 0.6 * innerLength * Math.cos(Math.atan2(roomHeight + hatchThickness, ladderRun)) + (4 - 40 * 1) * Math.sin(Math.atan2(roomHeight + hatchThickness, ladderRun)) - strutBoxY, hatchThickness - 0.6 * innerLength * Math.sin(Math.atan2(roomHeight + hatchThickness, ladderRun)) + (4 - 40 * 1) * Math.cos(Math.atan2(roomHeight + hatchThickness, ladderRun)) - strutBoxZ)mm
Strut link length, box side(1.05 * strutOpenReach + 0.9 * strutClosedReach) / 2mm
Strut pin distanceMath.hypot(strutHatchY - strutBoxY, strutHatchZ - strutBoxZ)mm
Strut middle pin along(strutReach ** 2 + strutLinkA ** 2 - ((1.05 * strutOpenReach - 0.9 * strutClosedReach) / 2) ** 2) / (2 * strutReach)mm
Strut middle pin off the lineMath.sqrt(strutLinkA ** 2 - strutAlong ** 2)mm
Strut middle pin YstrutBoxY + (strutAlong * (strutHatchY - strutBoxY) - strutOff * (strutHatchZ - strutBoxZ)) / strutReachmm
Strut middle pin ZstrutBoxZ + (strutAlong * (strutHatchZ - strutBoxZ) + strutOff * (strutHatchY - strutBoxY)) / strutReachmm