A sliding gate leaf welded from round steel pipe, with top and bottom pipes that roll between rollers fixed to the gate posts, braced bays and an infill of your choice.
Category: Gates › Sliding Gates › Sliding Gate Leaves
By Huu Khanh Nguyen · Updated November 13, 2026
| Name | Default | Unit |
|---|---|---|
| Leaf length | 5944 | mm |
| Leaf height | 1829 | mm |
| Handing | right | |
| Tail length | 1219 | mm |
| Tail outline | full | |
| Bottom pipe diameter | 60.325 | mm |
| Bottom pipe diameter across the gate | beamHeight | mm |
| Vertical pipe diameter | 47.625 | mm |
| Top pipe diameter | 60.325 | mm |
| Bay count | Math.ceil((sizeX - leafThickness) / 1524) | |
| Bay width | (sizeX - leafThickness) / bayCount - leafThickness | mm |
| Largest opening | 110 | mm |
| Finish | white | |
| Infill units | Math.max(Math.ceil(((Array.from({ length: (1 * (Math.min(Math.max(Math.ceil((sizeZ - beamHeight - topMemberHeight) / 1200), Math.ceil((sizeX - 2 * leafThickness) * (sizeZ - beamHeight - topMemberHeight) / 2165000)), Math.max(1, Math.floor((sizeZ - beamHeight - topMemberHeight) / 300))) * Math.ceil((sizeX - 2 * leafThickness) * ((sizeZ - beamHeight - topMemberHeight) / Math.min(Math.max(Math.ceil((sizeZ - beamHeight - topMemberHeight) / 1200), Math.ceil((sizeX - 2 * leafThickness) * (sizeZ - beamHeight - topMemberHeight) / 2165000)), Math.max(1, Math.floor((sizeZ - beamHeight - topMemberHeight) / 300)))) / 2165000)) - 1) + 1 }, (entry, index) => ((field) => infillDirection == 'up' ? field.sizeZ : field.sizeX)(((copy) => ({ sizeX: (sizeX - 2 * leafThickness) / Math.ceil((sizeX - 2 * leafThickness) * ((sizeZ - beamHeight - topMemberHeight) / Math.min(Math.max(Math.ceil((sizeZ - beamHeight - topMemberHeight) / 1200), Math.ceil((sizeX - 2 * leafThickness) * (sizeZ - beamHeight - topMemberHeight) / 2165000)), Math.max(1, Math.floor((sizeZ - beamHeight - topMemberHeight) / 300)))) / 2165000), sizeZ: (sizeZ - beamHeight - topMemberHeight) / Math.min(Math.max(Math.ceil((sizeZ - beamHeight - topMemberHeight) / 1200), Math.ceil((sizeX - 2 * leafThickness) * (sizeZ - beamHeight - topMemberHeight) / 2165000)), Math.max(1, Math.floor((sizeZ - beamHeight - topMemberHeight) / 300))) }))(index))).reduce((first, next) => Math.min(first, next))) - (19.05)) / ((19.05) + gap)), 0) + 1 | |
| Infill arrangement | across |