A tile covering laid in the grass paver, square with round hole pattern on the face you give it, with grout between the tiles. The face the tiles cover, Tiles cut at the edge, whole inside, or overlapping, Pattern size and tile thickness, Joint widths and joint depth, Pattern rotation and offset from the face center, Tile and grout colour
Category: Tiles › Perforation
By Huu Khanh Nguyen · Updated November 15, 2026
| Name | Default | Unit |
|---|---|---|
| Object On Boundaries | trim | |
| Pattern rotation | 0 | ° |
| Pattern offset X | 0 | mm |
| Pattern offset Y | 0 | mm |
| Side | 400 | mm |
| Thickness | 10 | mm |
| Horizontal joint | 5 | mm |
| Vertical joint | 5 | mm |
| Joint depth | 5 | mm |
| Generate surface | true | |
| Tile colour | #b8b5ae | |
| Tile roughness | 0.5 | |
| Tile metalness | 0 | |
| Joint colour | #d0d0d0 | |
| patternX | (rings[0].map((p) => p[0]).reduce((m, x) => Math.min(m, x)) + rings[0].map((p) => p[0]).reduce((m, x) => Math.max(m, x))) / 2 + offsetX | mm |
| patternY | (rings[0].map((p) => p[1]).reduce((m, x) => Math.min(m, x)) + rings[0].map((p) => p[1]).reduce((m, x) => Math.max(m, x))) / 2 + offsetY | mm |
| wallA | Math.sqrt(((sq) => ((R) => R.reduce((m, A, i) => R.reduce((n, B, k) => (k <= i) ? n : A.reduce((q, p) => B.slice(1).reduce((s, b, j) => Math.min(s, sq(p, B[j], b)), q), n), m), 1e300))(tile))((p, a, b) => ((dx, dy) => ((t) => (p[0] - a[0] - t * dx) ** 2 + (p[1] - a[1] - t * dy) ** 2)(Math.max(0, Math.min(1, ((p[0] - a[0]) * dx + (p[1] - a[1]) * dy) / (dx * dx + dy * dy)))))(b[0] - a[0], b[1] - a[1]))) | mm |
| wallB | Math.sqrt(((sq) => ((R) => R.reduce((m, A, i) => R.reduce((n, B, k) => (k >= i) ? n : A.reduce((q, p) => B.slice(1).reduce((s, b, j) => Math.min(s, sq(p, B[j], b)), q), n), m), 1e300))(tile))((p, a, b) => ((dx, dy) => ((t) => (p[0] - a[0] - t * dx) ** 2 + (p[1] - a[1] - t * dy) ** 2)(Math.max(0, Math.min(1, ((p[0] - a[0]) * dx + (p[1] - a[1]) * dy) / (dx * dx + dy * dy)))))(b[0] - a[0], b[1] - a[1]))) | mm |