Heavy Under Beam Sliding Gate Leaf

Heavy Under Beam Sliding Gate Leaf

A sliding gate leaf for very wide openings, with a base and a bottom rail welded into one deep beam, wide uprights, a stout top rail, a long tail brace and an infill of your choice.

Details

Category: Gates › Sliding Gates › Sliding Gate Leaves

By Huu Khanh Nguyen · Updated November 13, 2026

Parameters

NameDefaultUnit
Leaf length8400mm
Leaf height1800mm
Handingright
Tail length2380mm
Tail outlinesloped
Base height136mm
Base depth142mm
Upright depth60mm
Top rail height120mm
Largest opening110mm
Finishwhite
Infill unitsMath.max(Math.ceil(((Array.from({ length: (1 * (Math.min(Math.max(Math.ceil((sizeZ - (beamHeight + 120) - topMemberHeight) / 1200), Math.ceil(((sizeX - tailLength) - 240) * (sizeZ - (beamHeight + 120) - topMemberHeight) / 2165000)), Math.max(1, Math.floor((sizeZ - (beamHeight + 120) - topMemberHeight) / 300))) * fieldColumns) - 1) + 1 }, (entry, index) => ((field) => infillDirection == 'up' ? field.sizeZ : field.sizeX)(((copy) => ({ sizeX: ((sizeX - tailLength) - 240) / fieldColumns - dividerWidth * (((copy % fieldColumns) > 0 ? 0.5 : 0) + ((copy % fieldColumns) < fieldColumns - 1 ? 0.5 : 0)), sizeZ: (sizeZ - (beamHeight + 120) - topMemberHeight) / Math.min(Math.max(Math.ceil((sizeZ - (beamHeight + 120) - topMemberHeight) / 1200), Math.ceil(((sizeX - tailLength) - 240) * (sizeZ - (beamHeight + 120) - topMemberHeight) / 2165000)), Math.max(1, Math.floor((sizeZ - (beamHeight + 120) - topMemberHeight) / 300))) }))(index))).reduce((first, next) => Math.min(first, next))) - (19.05)) / ((19.05) + gap)), 0) + 1
Infill arrangementacross
Track channel width0mm
Track channel height0mm
Reinforcement upright width0mm
Panel width between reinforcements1000mm
Diagonal crossbarsfalse
Infill columnsMath.max(Math.ceil(((sizeX - tailLength) - 240) * ((sizeZ - (beamHeight + 120) - topMemberHeight) / Math.min(Math.max(Math.ceil((sizeZ - (beamHeight + 120) - topMemberHeight) / 1200), Math.ceil(((sizeX - tailLength) - 240) * (sizeZ - (beamHeight + 120) - topMemberHeight) / 2165000)), Math.max(1, Math.floor((sizeZ - (beamHeight + 120) - topMemberHeight) / 300)))) / 2165000), dividerWidth > 0 ? Math.ceil(((sizeX - tailLength) - 240) / panelWidth) : 1)