One section of a telescoping sliding gate, a frame of two rails and two stiles with an infill of your choice, built to run over and under the other sections of the same gate.
Category: Gates › Sliding Gates › Sliding Gate Leaves
By Huu Khanh Nguyen · Updated November 13, 2026
| Name | Default | Unit |
|---|---|---|
| Section length | 2216.15 | mm |
| Leaf height | 1829 | mm |
| Handing | right | |
| Tail length | 0 | mm |
| Tail outline | full | |
| Bottom rail height | 101.6 | mm |
| Bottom rail depth | 50.8 | mm |
| Frame depth | 50.8 | mm |
| Top rail height | 101.6 | mm |
| Largest opening | 110 | mm |
| Finish | white | |
| Infill units | Math.max(Math.ceil(((Array.from({ length: (Math.min(Math.max(Math.ceil((sizeZ - 203.2) / 1200), Math.ceil((sizeX - 203.2) * (sizeZ - 203.2) / 2165000)), Math.max(1, Math.floor((sizeZ - 203.2) / 300))) * Math.ceil((sizeX - 203.2) * ((sizeZ - 203.2) / Math.min(Math.max(Math.ceil((sizeZ - 203.2) / 1200), Math.ceil((sizeX - 203.2) * (sizeZ - 203.2) / 2165000)), Math.max(1, Math.floor((sizeZ - 203.2) / 300)))) / 2165000) - 1) + 1 }, (entry, index) => ((field) => infillDirection == 'up' ? field.sizeZ : field.sizeX)(((copy) => ({ sizeX: (sizeX - 203.2) / Math.ceil((sizeX - 203.2) * ((sizeZ - 203.2) / Math.min(Math.max(Math.ceil((sizeZ - 203.2) / 1200), Math.ceil((sizeX - 203.2) * (sizeZ - 203.2) / 2165000)), Math.max(1, Math.floor((sizeZ - 203.2) / 300)))) / 2165000), sizeZ: (sizeZ - 203.2) / Math.min(Math.max(Math.ceil((sizeZ - 203.2) / 1200), Math.ceil((sizeX - 203.2) * (sizeZ - 203.2) / 2165000)), Math.max(1, Math.floor((sizeZ - 203.2) / 300))) }))(index))).reduce((first, next) => Math.min(first, next))) - (19.05)) / ((19.05) + gap)), 0) + 1 | |
| Infill arrangement | across |