A roller garage door whose slat curtain winds onto an open roll tube between two end plates above the opening, with no box around it. Slat profile, Tubular motor on either side or hand operation, Roll tube and guide rail size, Finish colour
Category: Garage Doors › Overhead Doors
By Huu Khanh Nguyen · Updated November 13, 2026
| Name | Default | Unit |
|---|---|---|
| Clear width | 3000 | mm |
| Clear height | 2500 | mm |
| Slat height | 75 | mm |
| Slat thickness | 20 | mm |
| Roll tube | 70 | mm |
| Guide rail width | 95 | mm |
| Drive side | left | |
| Finish | white | |
| Opening travel | 0 | mm |
| Rail Span | clearWidth + 2 * railWidth | mm |
| Overall width | railSpan + 2 * (95 - tipInset + 2) | mm |
| Overall depth | capSize | mm |
| Overall height | clearHeight + capSize | mm |
| Slat tip from rail closed end | 38 | mm |
| Roll tube circumradius | shaftDiameter / 2 / Math.cos(Math.PI / 8) | mm |
| Curtain wound at rest | Math.PI * (2 * shaftRadius + thickness) | mm |
| Guide rail depth | Math.min(35, Math.max(28, thickness + 14.36)) | mm |
| Wall face | (railDepth - thickness) / 2 | mm |
| Coil radius bound | Math.sqrt(shaftRadius ** 2 + (layerLength + clearHeight + 2 * coverHeight) * thickness / Math.PI) | mm |
| Roll axis height | clearHeight + openRadius | mm |
| End plate size | 2 * openRadius + wallY <= 360 ? 360 : 405 | mm |
| Slats hanging | Math.floor((axisHeight - lift) / coverHeight) | |
| Coil radius | Math.sqrt(shaftRadius ** 2 + (Math.ceil((axisHeight + layerLength) / coverHeight) - hanging) * coverHeight * thickness / Math.PI) | mm |