A sliding gate leaf with a deep beam along its foot that carries the whole gate over its tail, a frame with an infill of your choice, and a tail that is either a full panel or a braced triangle.
Category: Gates › Sliding Gates › Sliding Gate Leaves
By Huu Khanh Nguyen · Updated November 13, 2026
| Name | Default | Unit |
|---|---|---|
| Leaf length | 4480 | mm |
| Leaf height | 1500 | mm |
| Handing | right | |
| Tail length | 1740 | mm |
| Tail outline | sloped | |
| Under-beam height | 120 | mm |
| Under-beam depth | 120 | mm |
| Frame depth | 60 | mm |
| Top rail height | 60 | mm |
| Frame width | 60 | mm |
| Largest opening | 110 | mm |
| Finish | white | |
| Infill units | Math.max(Math.ceil(((Array.from({ length: (1 * (Math.min(Math.max(Math.ceil((sizeZ - beamHeight - topMemberHeight) / 1200), Math.ceil(((tailOutline == 'full' ? sizeX : sizeX - tailLength) - 2 * frameWidth) * (sizeZ - beamHeight - topMemberHeight) / 2165000)), Math.max(1, Math.floor((sizeZ - beamHeight - topMemberHeight) / 300))) * Math.ceil(((tailOutline == 'full' ? sizeX : sizeX - tailLength) - 2 * frameWidth) * ((sizeZ - beamHeight - topMemberHeight) / Math.min(Math.max(Math.ceil((sizeZ - beamHeight - topMemberHeight) / 1200), Math.ceil(((tailOutline == 'full' ? sizeX : sizeX - tailLength) - 2 * frameWidth) * (sizeZ - beamHeight - topMemberHeight) / 2165000)), Math.max(1, Math.floor((sizeZ - beamHeight - topMemberHeight) / 300)))) / 2165000)) - 1) + 1 }, (entry, index) => ((field) => infillDirection == 'up' ? field.sizeZ : field.sizeX)(((copy) => ({ sizeX: ((tailOutline == 'full' ? sizeX : sizeX - tailLength) - 2 * frameWidth) / Math.ceil(((tailOutline == 'full' ? sizeX : sizeX - tailLength) - 2 * frameWidth) * ((sizeZ - beamHeight - topMemberHeight) / Math.min(Math.max(Math.ceil((sizeZ - beamHeight - topMemberHeight) / 1200), Math.ceil(((tailOutline == 'full' ? sizeX : sizeX - tailLength) - 2 * frameWidth) * (sizeZ - beamHeight - topMemberHeight) / 2165000)), Math.max(1, Math.floor((sizeZ - beamHeight - topMemberHeight) / 300)))) / 2165000), sizeZ: (sizeZ - beamHeight - topMemberHeight) / Math.min(Math.max(Math.ceil((sizeZ - beamHeight - topMemberHeight) / 1200), Math.ceil(((tailOutline == 'full' ? sizeX : sizeX - tailLength) - 2 * frameWidth) * (sizeZ - beamHeight - topMemberHeight) / 2165000)), Math.max(1, Math.floor((sizeZ - beamHeight - topMemberHeight) / 300))) }))(index))).reduce((first, next) => Math.min(first, next))) - (19.05)) / ((19.05) + gap)), 0) + 1 | |
| Infill arrangement | across | |
| Track channel width | 0 | mm |
| Track channel height | 0 | mm |