A cabinet flap that falls open downward on concealed hinges and folding stays, with its pull.
Category: Beds › Single-Level Beds › Trundles › Cabinet Fronts
By Huu Khanh Nguyen · Updated November 14, 2026
| Name | Default | Unit |
|---|---|---|
| Width | 597 | mm |
| Height | 357 | mm |
| Depth | 22 | mm |
| Species And Finish | white | |
| Door Stile Width | 55.5625 | mm |
| Pull Angle | 0 | ° |
| Pull Anchor | free | |
| Pull Drop | 27.78125 | mm |
| Hinge Style | concealed | |
| Hinge Inset | 22.5 | mm |
| Hinge Side Offset | 8 | mm |
| Hinge Count | (width <= 1000 ? 2 : (width <= 1700 ? 3 : (width <= 2200 ? 4 : (width <= 2400 ? 5 : (width <= 2600 ? 6 : 7))))) + (height > 600 ? 1 : 0) | |
| Stay Side | both | |
| Stay Length | 200 | |
| Barrel Inset | 60 | mm |
| Barrel Length | 40 | mm |
| Surface Hinges | 2 | |
| Barrel Diameter | 8 | mm |
| Open Angle | 0 | ° |
| Open Angle Limit | 90 | ° |
| Open Note | true | |
| Opens On Click | true | |
| Open Note Apex | handle | |
| Hinge Shift Y | hingeStyle == 'concealed' ? (((k, s, l1, l2) => ((p0x, p0y, p1x, p1y) => ((dx, dy) => ((d) => ((x) => p0y + x * dy / d + -1 * Math.sqrt(l1 * l1 - x * x) * dx / d)((l1 * l1 - l2 * l2 + d * d) / (2 * d)))(Math.hypot(dx, dy)))(p1x - p0x, p1y - p0y))(0.7 - (k * -13.6 + s * -2.101), 6.301 - (-s * -13.6 + k * -2.101), 8.7 - (k * -9.865 + s * -6.485), -3.098 - (-s * -9.865 + k * -6.485)))(Math.cos(openAngle * Math.PI / 180), Math.sin(openAngle * Math.PI / 180), Math.hypot(0.7 - -13.6, 6.301 - -2.101), Math.hypot(8.7 - -9.865, -3.098 - -6.485))) : 0 | mm |
| Hinge Shift Z | hingeStyle == 'concealed' ? (((k, s, l1, l2) => ((p0x, p0y, p1x, p1y) => ((dx, dy) => ((d) => ((x) => p0x + x * dx / d + -1 * Math.sqrt(l1 * l1 - x * x) * -dy / d)((l1 * l1 - l2 * l2 + d * d) / (2 * d)))(Math.hypot(dx, dy)))(p1x - p0x, p1y - p0y))(0.7 - (k * -13.6 + s * -2.101), 6.301 - (-s * -13.6 + k * -2.101), 8.7 - (k * -9.865 + s * -6.485), -3.098 - (-s * -9.865 + k * -6.485)))(Math.cos(openAngle * Math.PI / 180), Math.sin(openAngle * Math.PI / 180), Math.hypot(0.7 - -13.6, 6.301 - -2.101), Math.hypot(8.7 - -9.865, -3.098 - -6.485))) : 0 | mm |
| Stay Pin Height | stayLength == 200 ? 90.7 : 124.33 | mm |
| Room Behind The Leaf | 300 | mm |
| Axis Depth | 0 | mm |
| Axis Rise | 0 | mm |