Blind Corner Carcass Rails

Blind Corner Carcass Rails

The cabinet box of a blind corner unit, with a closed blind part beside the access opening, sides, bottom, front and rear top rails, optional left and right top braces (a brace front end rests on the front rail, or on the face frame of the host when the front rail is off), back, shelves, an optional hinge side divider and a choice of toe notch, separate base, legs and plinth, feet or no base.

Details

Category: Framed Kitchen Cabinets › Framed Base Cabinets › Carcasses

By Huu Khanh Nguyen · Updated November 14, 2026

Parameters

NameDefaultUnit
Width1219.2mm
Depth609.6mm
Access Width457.2mm
Height876.3mm
Bottomtrue
Backtrue
Shelves1
Front Railtrue
Front Rail WidthMath.min(80, ((sizeY - backInset - backThickness) - 2 * panelThickness) / 2)mm
Front Rail HeightpanelThicknessmm
Rear Railtrue
Rear Rail WidthMath.min(80, ((sizeY - backInset - backThickness) - 2 * panelThickness) / 2)mm
Rear Rail HeightpanelThicknessmm
Left Bracefalse
Left Brace WidthMath.min(76.2, sizeX - 3 * panelThickness - accessWidth)mm
Left Brace HeightMath.min(12.7, Math.min(sizeZ - bottomHeight - 2 * panelThickness, panelThickness + (sizeZ - bottomHeight - 2 * panelThickness) / (shelfCount + 1) - (shelfCount > 0 ? shelfThickness / 2 : 0)))mm
Right Bracefalse
Right Brace WidthMath.min(76.2, accessWidth)mm
Right Brace HeightMath.min(12.7, Math.min(sizeZ - bottomHeight - 2 * panelThickness, panelThickness + (sizeZ - bottomHeight - 2 * panelThickness) / (shelfCount + 1) - (shelfCount > 0 ? shelfThickness / 2 : 0)))mm
Basenotch
Toe Height114.3mm
Toe Depth76.2mm
Toe Board Thickness12.7mm
Leg Height150mm
Leg Diameter35mm
Leg Inset50mm
Plate Diameter48mm
Plate Thickness3mm
Bottom Height(base == 'legs' || base == 'feet' ? legHeight : base == 'none' ? 0 : toeHeight)mm
Panel Thickness16mm
Back Thickness2.8mm
Back Inset35.8mm
Shelf Thickness16mm
Shelf Setback46.8mm
Fixed Floorfalse
Fixed Floor Height0mm
Hinge Side Dividerfalse