A rigid welded wire panel with the horizontal wires on one face, optionally pressed into V folds for stiffness and finished with pins on one edge.
Category: Fences › Metal Mesh Fences › Fence Panels
By Huu Khanh Nguyen · Updated November 7, 2026
| Name | Default | Unit |
|---|---|---|
| Width | 2500 | mm |
| Height | 2030 | mm |
| Spacing between vertical wires | 50 | mm |
| Spacing between horizontal wires | 200 | mm |
| Horizontal wire diameter | 5 | mm |
| Vertical wire diameter | 5 | mm |
| Number of V folds | Math.min(sizeZ <= 1230 ? 2 : sizeZ <= 1930 ? 3 : 4, gapCount) | |
| Wire along each fold apex | true | |
| Pin length | 30 | mm |
| Pins at | top | |
| V fold depth | 25 | mm |
| Gaps between horizontal wires | Math.floor((sizeZ - Math.max(pinLength, horizontalWireDiameter)) / wirePitchUp) | |
| Height of the first horizontal wire | pinSide == 'bottom' ? sizeZ - horizontalWireDiameter / 2 - gapCount * wirePitchUp : horizontalWireDiameter / 2 | mm |
| Number of vertical wires | Math.floor(sizeX / wirePitchAlong) | |
| Gaps from fold to fold | Math.floor(gapCount / Math.max(pleatCount, 1)) | |
| Height of the lowest fold base | firstRowZ + Math.floor((gapCount - (pleatCount - 1) * foldStep - 1) / 2) * wirePitchUp | mm |
| Fold start offset from the horizontal wire | (verticalWireDiameter + horizontalWireDiameter) / 2 * Math.tan(Math.atan(foldDepth / (wirePitchUp / 2)) / 2) | mm |
| V fold depth reached by the vertical wire | foldDepth * (1 - foldClearance / (wirePitchUp / 2)) | mm |
| Finish | white |