Aluminium Scissors Loft Ladder

Aluminium Scissors Loft Ladder

A scissor-action loft ladder whose flat treads and interlocking side links fold into a hatch in the ceiling. Ceiling opening width and length, Room height, Stowed or unfolded

Details

Category: Stairs › Loft Access Ladders

By Huu Khanh Nguyen · Updated November 14, 2026

Parameters

NameDefaultUnit
Ceiling opening width600mm
Ceiling opening length1200mm
Room height2800mm
Unfolded1
Hatch widthopeningWidth - 60mm
Hatch lengthopeningLength - 60mm
Hatch thickness36mm
Tread countroomHeight <= 2500 ? 10 : roomHeight <= 2800 ? 11 : roomHeight <= 3000 ? 12 : 13
Tread pitch240 + 20 * (roomHeight - [2300, 2500, 2800, 3000][treadCount - 10]) / ([2500, 2800, 3000, 3300][treadCount - 10] - [2300, 2500, 2800, 3000][treadCount - 10])mm
Crossings per sidetreadCount + 1
Slope angleMath.asin((roomHeight + hatchThickness - 30) / Math.hypot(crossings * treadPitch, treadPitch * Math.tan(25 / 57.29577951308232))) - Math.atan2(treadPitch * Math.tan(25 / 57.29577951308232), crossings * treadPitch)
Crossing pitch31.833333333333332 + (treadPitch - 31.833333333333332) * unfoldmm
Link lengthtreadPitch / Math.cos(25 / 57.29577951308232)mm
Link angleMath.acos(pitchNow / linkLength)
Strut length0.6 * innerLengthmm
Strut pin position on the hatch(0.35 * innerLength * Math.cos(lidAngle) - (100 - hatchThickness) * Math.sin(lidAngle)) + Math.sqrt(strutLength * strutLength - (-12 - (0.35 * innerLength * Math.sin(lidAngle) + (100 - hatchThickness) * Math.cos(lidAngle))) * (-12 - (0.35 * innerLength * Math.sin(lidAngle) + (100 - hatchThickness) * Math.cos(lidAngle))))mm
Lever pin position on the hatch((100 + (linkLength * Math.sin(linkAngle)) * Math.sin(axisAngle)) * Math.cos(lidAngle) - (-(linkLength * Math.sin(linkAngle)) * Math.cos(axisAngle)) * Math.sin(lidAngle)) + Math.sqrt(90000 - (-26 - ((100 + (linkLength * Math.sin(linkAngle)) * Math.sin(axisAngle)) * Math.sin(lidAngle) + (-(linkLength * Math.sin(linkAngle)) * Math.cos(axisAngle)) * Math.cos(lidAngle))) * (-26 - ((100 + (linkLength * Math.sin(linkAngle)) * Math.sin(axisAngle)) * Math.sin(lidAngle) + (-(linkLength * Math.sin(linkAngle)) * Math.cos(axisAngle)) * Math.cos(lidAngle))))mm
Lever pin y-innerLength / 2 + leverSlide * Math.cos(lidAngle) + (-26) * Math.sin(lidAngle)mm
Lever pin zhatchThickness - leverSlide * Math.sin(lidAngle) + (-26) * Math.cos(lidAngle)mm
Hatch angleslopeAngle * unfold
Axis angle1.5707963267948966 * (1 - unfold) - slopeAngle * unfold
Tread lengthopeningWidth <= 550 ? 240 : openingWidth <= 650 ? 300 : 380mm